POWERFLOW CONTROL CO,. LTD.
Hangzhou Powerflow Technology Co., Ltd. Expertise in Flow Control.
Add to Cart
1. Product description
1500 Series Positioner is compact positioner for integrated mounting on pneumatically operated process valves. Remote setpoint adjustment via a 4-20 mA signal. A contact-free position sensor measures the position of the valve spindle. As an option a 4-20mA feedback can beintegrated. Simple installation through autotune function The valve position indication is shown through LED components.
2. Technical Data
| Material | PC,PA6-GF30,SI |
| Power supply | 24V DC ±10% |
| Set-point signal | 4 - 20 mA |
| Input resistance for set-point signal | 120Ω |
| Ambient temperature | 0 - 70° |
| Pneumatic connection | Plug-in hose connector G1/4 (internal Φ6mm) |
| Electrical connection | M12 3-pins B-code (cable Φ 4-6mm); M12 4-pins D-code (cable Φ4-6mm) |
| Supply pressure | 3-7 bar, specific values depending on the actuator |
| Air flow rate | 17 L/min (Sup=0.6MPa); 58L/min (Sup=0.6MPa) |
| Stroke control range | Linear 5-50mm; Rotary 90° |
| Installation | As required, preferably with actuator in upright position, screw |
| Protection class | IP66 |
| Power consumption | ＜5W |
3. Product type selection
4. Features
5. Structure
| 1 | Protective cover |
| 2 | Main body casing |
| 3 | Electrical connection |
| 4 | Pneumatic connection |
| 5 | Actuator connection |
6. Electrical connections and pneumatic connections
| X2(Optional) | ||
|---|---|---|
| Pin | Description | Signal type |
| 1 | Analogue signal output + | 4 - 20mA |
| 3 | Analogue signal output GND | GND |
| 4 | NC | NULL |
| X3 | ||
|---|---|---|
| Pin | Description | Signal type |
| 1 | Power supply + | +24 V |
| 2 | Power supply GND | GND |
| 3 | Set signal input + | 4 - 20 mA |
| 4 | Set signal input GND | GND |
| P | Air supply enter (built-in filter, filter size 5 μm) |
| R | Air exhaust |
| C | Check valve |
| A1 | Pilot air outlet 1 |
| A2 | Pilot air outlet 2 |