1600 series intelligent electro-pneumatic valve positioner is simple to operate and has plenty software functions. It can easily be operated via the LCD and keypad.

The product is designed for integral pneumatic control valve, particularly suitable for diaphragm valves and angle seat valves.

The positioner adjusts the valve position quickly and accurately via detecting the position sensor signal, .

2.Technical Datas

Material	PC,PA6-GF30,Stainless Steel,SI
Power supply	24V DC ±10%
Set-point signal	0/4-20mA or 0-5/10 V
Input resistance for set-point signal	240Ω at 0/4-20mA, 21KΩ at 0-5/10V
Control medium Dust concentration Particle density Pressure condensation point Oil concentration	Neutral gases, air DIN ISO 8573-1 Class 5 (<40μm particle size) Class 5 (<10mg/m3) Cass 3 (<-20°C) Class 5 (<25mg/m3)
Ambient Temperature	0-70°C
Pneumatic Connection	Plug-in hose connector G1/4(internal Φ6mm)
Electrical Connection	M12 3-pins B-coded(cable ø 4-6mm) M12 4-pins D-coded(cable ø 4-6mm) M12 5-pins A-coded(cable ø 4-6mm)
Supply Pressure	3~7 bar, specific values depending on the actuator
Air Flow Rate	17 L/min, 58 L/min(only single-acting)
Stroke Control Range	Linear 5-50mm Rotary 90°
Installation	As required, Preferably with actuator in upright position, Screw.
Protection Class	IP65
Power Consumption	<5W
Explosion Proof	Ex nA IIC T4

3. Product type selection

4. Dimensions

5. Additional software functions

Setting safety position for the position controller
Configuration of signal level fault detection
The binary outputs activating
Configuration of the outputs
The control parameters calibrating
Manual control rate setting
Code protection
Selection of the transfer characteristic between set-point value and stroke
Sealing function for position controller
Effective sense of direction between input signal and set-point value
Limit of the machanical stroke range
Control parameters setting

6. Signal flow diagram

Inquiry Cart 0