1600 series intelligent electro-pneumatic valve positioner is easy to operate and has rich software functions. It can easily be operated via the LCD and keypad.

The product is designed for integral pneumatic control valve, particularly suitable for angle seat valves and diaphragm valves.

Through detecting the position sensor signal, the positioner adjusts the valve position quickly and accurately.

2.Technical Datas

Material	PC,PA6-GF30,Stainless Steel,SI
Power supply	24V DC ±10%
Set-point signal	0/4-20mA or 0-5/10 V
Input resistance for set-point signal	240Ω at 0/4-20mA, 21KΩ at 0-5/10V
Control medium Dust concentration Particle density Pressure condensation point Oil concentration	Neutral gases, air DIN ISO 8573-1 Class 5 (<40μm particle size) Class 5 (<10mg/m3) Cass 3 (<-20°C) Class 5 (<25mg/m3)
Ambient Temperature	0-70°C
Pneumatic Connection	Plug-in hose connector G1/4(internal Φ6mm)
Electrical Connection	M12 3-pins B-coded(cable ø 4-6mm) M12 4-pins D-coded(cable ø 4-6mm) M12 5-pins A-coded(cable ø 4-6mm)
Supply Pressure	3~7 bar, specific values depending on the actuator
Air Flow Rate	17 L/min, 58 L/min(only single-acting)
Stroke Control Range	Linear 5-50mm Rotary 90°
Installation	As required, Preferably with actuator in upright position, Screw.
Protection Class	IP65
Power Consumption	<5W
Explosion Proof	Ex nA IIC T4

3. Product type selection

4. Structure

1	LCD and key panel
2	Stainless steel body casing
3	Main body casing
4	Electrical connection
5	Pneumatic connection
6	Actuator connection

5. Schematic diagram

6. Signal flow diagram

Inquiry Cart 0