POWERFLOW CONTROL CO,. LTD.
Hangzhou Powerflow Technology Co., Ltd. Expertise in Flow Control.
Add to Cart
1. Product Description
1600 series intelligent electro-pneumatic valve positioner is easy to operate and has rich software functions. It can easily be operated via the LCD and keypad.
The product is designed for integral pneumatic control valve, particularly suitable for angle seat valves and diaphragm valves.
Through detecting the position sensor signal, the positioner adjusts the valve position quickly and accurately.
2.Technical Datas
| Material | PC,PA6-GF30,Stainless Steel,SI |
| Power supply | 24V DC ±10% |
| Set-point signal | 0/4-20mA or 0-5/10 V |
| Input resistance for set-point signal | 240Ω at 0/4-20mA, 21KΩ at 0-5/10V |
| Control medium Dust concentration Particle density Pressure condensation point Oil concentration | Neutral gases, air DIN ISO 8573-1 Class 5 (<40μm particle size) Class 5 (<10mg/m3) Cass 3 (<-20°C) Class 5 (<25mg/m3) |
| Ambient Temperature | 0-70°C |
| Pneumatic Connection | Plug-in hose connector G1/4(internal Φ6mm) |
| Electrical Connection | M12 3-pins B-coded(cable ø 4-6mm) M12 4-pins D-coded(cable ø 4-6mm) M12 5-pins A-coded(cable ø 4-6mm) |
| Supply Pressure | 3~7 bar, specific values depending on the actuator |
| Air Flow Rate | 17 L/min, 58 L/min(only single-acting) |
| Stroke Control Range | Linear 5-50mm Rotary 90° |
| Installation | As required, Preferably with actuator in upright position, Screw. |
| Protection Class | IP65 |
| Power Consumption | <5W |
| Explosion Proof | Ex nA IIC T4 |
3. Product type selection
Remark:
In the air flow rate option, code Q1 is suggested to match the actuator of 40-100 mm internal gas chamber diameter, code Q2 is suggested to match the actuator of 125-160 mm internal gas chamber diameter. Code Q2 is only used for single-acting actuator, and only in Freeze state when power-off. The air flow rates for code Q1 and Q2 are under the condition of 0.6Mpa input pressure.
In the valve max stroke option, AT actuator range for code S4 is AT50~AT125. For other actuator models, please consult our company. It is no need to select the thread type option for code S4.
Power off state for single-acting option is Safe by default.
4. Structure
| 1 | LCD and key panel |
|---|---|
| 2 | Stainless steel body casing |
| 3 | Main body casing |
| 4 | Electrical connection |
| 5 | Pneumatic connection |
| 6 | Actuator connection |
5. Electrical connections and pneumatic connections
| X1 | ||
|---|---|---|
| Pin | Description | Signal type |
| 1 | Analogue signal output + | 0/4 – 20 mA or 0 – 5/10 V |
| 2 | Binary signal output 1 | 0/24 V |
| 3 | Binary signal output 2 | 0/24 V |
| 4 | Binary signal input + | 0-3V =“0”, 15-30V =“1” |
| 5 | Signal common GND | GND |
| X2(Optional for process control only) | ||
|---|---|---|
| Pin | Description | Signal type |
| 1 | Transmitter input + | +24 V |
| 2 | Transmitter signal output | 4 - 20mA |
| 3 | Transmitter GND | GND |
| X3 | ||
|---|---|---|
| Pin | Description | Signal type |
| 1 | Power supply + | +24 V |
| 2 | Power supply GND | GND |
| 3 | Set signal input + | 0/4 – 20 mA or 0 – 5/10 V |
| 4 | Set signal input GND | GND |
| P | Air supply enter (built-in filter, filter size 5 μm) |
| R | Air exhaust |
| C | Check valve |
| A1 | Pilot air outlet 1 |
| A2 | Pilot air outlet 2 |
6. Additional software functions