POWERFLOW CONTROL CO,. LTD.
Hangzhou Powerflow Technology Co., Ltd. Expertise in Flow Control.
Add to Cart
1. Product Description
POWERFLOW 1600 Series Positioners, easy to install, control and monitor on any type of pneumatic valve actuators with the highest diagnostic level. It is designed to be mounted on pneumatic actuators of process valves for the control of media. With a complete range of accessories, valves can be fully equipped and your process can be optimized at its best.
2.Technical Datas
| Material | PC,PA6-GF30,Stainless Steel,SI |
| Power supply | 24V DC ±10% |
| Set-point signal | 0/4-20mA or 0-5/10 V |
| Input resistance for set-point signal | 240Ω at 0/4-20mA, 21KΩ at 0-5/10V |
| Control medium Dust concentration Particle density Pressure condensation point Oil concentration | Neutral gases, air DIN ISO 8573-1 Class 5 (<40μm particle size) Class 5 (<10mg/m3) Cass 3 (<-20°C) Class 5 (<25mg/m3) |
| Ambient Temperature | 0-70°C |
| Pneumatic Connection | Plug-in hose connector G1/4(internal Φ6mm) |
| Electrical Connection | M12 3-pins B-coded(cable ø 4-6mm) M12 4-pins D-coded(cable ø 4-6mm) M12 5-pins A-coded(cable ø 4-6mm) |
| Supply Pressure | 3~7 bar, specific values depending on the actuator |
| Air Flow Rate | 17 L/min, 58 L/min(only single-acting) |
| Stroke Control Range | Linear 5-50mm Rotary 90° |
| Installation | As required, Preferably with actuator in upright position, Screw. |
| Protection Class | IP65 |
| Power Consumption | <5W |
| Explosion Proof | Ex nA IIC T4 |
3. Product type selection
4. Features
5. Structure
| 1 | LCD and key panel |
|---|---|
| 2 | Stainless steel body casing |
| 3 | Main body casing |
| 4 | Electrical connection |
| 5 | Pneumatic connection |
| 6 | Actuator connection |
6. Additional software functions
