
Add to Cart
1. Product Description
1880 series intelligent valve positioner is compact designed controller for integral pneumatic control valves.
The product is easy to operate and has rich software functions. It can easily be operated via the OLED display and keypad.
The positioner adjusts the valve position quickly and accurately through detecting the position sensor signal.
2.Technical Datas
Material | PC,PA6-GF30,SI |
Power supply | 24V DC ±10% |
Set-point signal | 0/4-20mA |
Control medium Dust concentration Particle density Pressure condensation point Oil concentration | Neutral gases, air DIN ISO 8573-1 Class 5 (<40μm particle size) Class 5 (<10mg/m3) Cass 3 (<-20°C) Class 5 (<25mg/m3) |
Ambient Temperature | 0-70°C |
Pneumatic Connection | Plug-in hose connector G1/4(internal Φ6mm) |
Electrical Connection | M12 3-pins B-coded(cable ø 4-6mm) M12 4-pins D-coded(cable ø 4-6mm) |
Supply Pressure | 3~7 bar, specific values depending on the actuator |
Air Flow Rate | 17 L/min |
Stroke Control Range | Linear 5-30mm |
Installation | As required, Preferably with actuator in upright position, Screw. |
Protection Class | IP66 |
Power Consumption | <5W |
Explosion Proof | Ex nA IIC T4 |
3. Product type selection
Remark:
The product is only used for single-acting line stroke actuator. It is suggested to match the actuator of 40-100 mm internal gas chamber diameter.
4. Structure
5. Electrical connections and pneumatic connections
X1 | ||||||||
---|---|---|---|---|---|---|---|---|
Pin | Description | Signal type | ||||||
1 | Analogue signal output + | 0/4 - 20 mA | ||||||
3 | Analogue signal output GND | GND | ||||||
X3 | ||||||||
Pin | Description | Signal type | ||||||
1 | Power supply + | +24 V | ||||||
2 | Power supply GND | GND | ||||||
3 | Set signal input | 0/4 - 20 mA | ||||||
4 | Set signal input GND | GND |
P | Air supply enter (built-in filter, filter size 5μm |
---|---|
R | Air exhaust |
A | Pilot air outlet |
6. Schematic diagram